Determination of the chemical composition of medieval glazed pottery from Drastar (Bulgaria) using PIXE/PIGE and LA-ICP-MS
Pages 69 to 82
Cite this article
- LYUBOMIROVA, Valentina,
- ŠMIT, Žiga,
- FAJFAR, Helena
- and KULEFF, Ivelin,
- Lyubomirova, Valentina.,
- et al.
- Lyubomirova, V.,
- Šmit, Ž.,
- Fajfar, H.
- and Kuleff, I.
https://doi.org/10.4000/archeosciences.4894
Cite this article
- Lyubomirova, V.,
- Šmit, Ž.,
- Fajfar, H.
- and Kuleff, I.
- Lyubomirova, Valentina.,
- et al.
- LYUBOMIROVA, Valentina,
- ŠMIT, Žiga,
- FAJFAR, Helena
- and KULEFF, Ivelin,
https://doi.org/10.4000/archeosciences.4894
Fifteen samples of medieval glazed pottery from
Drastar (present day Silistra), Bulgaria, dated between 10th and 18th centuries AD were
studied. The element concentration of the glazes was determined by
Proton Induced X-ray Emission (PIXE) and Proton Induced Gamma Emission
(PIGE) analysis. The composition of the clay bodies was studied by
Laser Ablation Inductively Coupled Plasma Mass Spectrometry
(LA-ICP-MS) after pelletization of the powdered clay. In addition,
Scanning Electron Microscopy with Energy Dispersive X-ray Spectroscopy
(SEM-EDX) was used for characterization of the clay bodies.
After
subtraction of the PbO and CuO content, the comparison between the
compositions of the clay bodies and the glazes revealed that both the
calcareous and the non-calcareous samples were glazed using lead oxide
by itself followed by firing in oxidizing atmosphere. Furthermore, it
was shown that iron, copper and manganese oxides were used to achieve
the desired colors.
- LA-ICP-MS
- Bulgaria
- PIXE-PIGE
- medieval glazed pottery
- Drastar
Publisher keywords: Bulgaria, Drastar, LA-ICP-MS, medieval glazed pottery, PIXE-PIGE
Composition chimique de poterie glaçurée medievale de Drastar (Bulgarie) déterminée par PIXE-PIGE et LA-ICP-MS
Quinze échantillons de céramiques glaçurées
médiévales de Drastar (aujourd'hui Silistra), en Bulgarie, datés entre
les 10ème et 18ème siècles après J.-C. ont été étudiés. Les
compositions élémentaires des glaçures ont été déterminées par les
méthodes analytiques : émission de rayons X induite par protons (PIXE)
et émission de rayons gamma induite par protons (PIGE). La composition
de la matrice argileuse a été étudiée par spectrométrie de masse á
plasma inductif avec ablation laser (LA-ICP-MS) sur pastilles des
poudres d'argiles. En complément, la microscopie électronique à
balayage couplée á la spectroscopie X en dispersion d’énergie
(SEM-EDX) a été aussi utilisée pour la caractérisation des matrices
argileuses.
Après soustraction des teneurs en PbO et CuO, la
comparaison entre les compositions des matrices et celles des glaçures
a révélé que tous les échantillons (pâtes calcaires et non calcaires)
ont été glaçurés en utilisant de l'oxyde de plomb suivi d'une cuisson
en atmosphère oxydante. De plus, il a été montré que le fer, le cuivre
et les oxydes de manganèse ont été utilisés pour obtenir les couleurs
souhaitées.
- LA-ICP-MS
- PIXE-PIGE
- Bulgarie
- céramiques médiévales glaçurées
- Drastar